Original file
Original / Factory · Diesel · 330D 245hp
BMW E90-E91- E92-E93 3.0 D original file Bosch · SW 397454
BMW E90-E91- E92-E93 3.0 D Turbo Diesel 180.2 kW (245 HP) Original2009, Turbo diesel, 180.2 kW (245 hp)
245 HP Factory calibration Stock backup file, 520 Nm, Diesel
Calibrated ECU file for 76RCKN384A (SW 397454). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 330D 245hp, N57D30A, 3L, Diesel. Engine #857 in our gains database.
- Power
- 245 HPfactory calibration
- Torque
- 520 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware O and software 397454.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 |
| Model year | 2009 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 180.2 kW (245 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 76RCKN384A |
| ECU software | 397454 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2993 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 84,0 X 90,0 mm |
| OEM engine code | N57D30A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 245 HP | 520 Nm | — | — |
| Stage 1 | 300 HP | 600 Nm | +55 (22.4%) | +80 |
| Stage 2 | 320 HP | 630 Nm | +75 (30.6%) | +110 |
| Stage 3 | 368 HP | 806 Nm | +123 (50.2%) | +286 |
| Stage 4 | 441 HP | 962 Nm | +196 (80%) | +442 |
About this calibration file
This is the factory (original) ECU calibration for the 2009 BMW E90 E91 3.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 76RCKN384A and software version 397454. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
76RCKN384A (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E90-E91- E92-E93 3.0 D 2009 Turbo-Diesel 180.2KW with Bosch O and software ID 76RCKN384A (Bosch software number 397454 ( 1037397454 )). This original file corresponds to a factory engine output of approximately 180.2 kW (~245 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as O, 76RCKN384A, 397454 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
99752D0C C9CEDD07 085B4E8D FC27EBA7 E2A06F04 F6BD7AC1 1E184FFB 3F0682FA